Allied Telesis AT-2746FX - Manual (Page 18)

Chapter 1: Network Adapter Card Overview
18
Type of Cabling 10Base-T operation:
Category 3 or better 100 ohm
shielded or unshielded twisted
pair cable
100Base-TX operation:
Category 5 or better 100 ohm
shielded or unshielded twisted
pair cable
Wiring Configuration MDI
Fiber Optic Port
Standard 10Base-FL
Speed 10 Mbps
Duplex Mode Half- or full-duplex
(Default: Full-duplex)
Type of Connector AT-2450FTX/SC - duplex SC
AT-2450FTX/ST - duplex ST
AT-2451FTX/SC - duplex SC
AT-2451FTX/ST - duplex ST
Maximum Operating Distance
1 2 kilometers (1.2 miles)
Type of Cabling 50/125 or 62.5/125 micron (core/
cladding) multimode fiber optic
cable
Operating Specifications Wavelength: 820 nm
Output power - 50/125 micron
cabling:
Minimum: -18.8 dBm
Maximum: -13.8 dBm
Output power - 62.5/125 micron
cabling:
Minimum: -15.0 dBm
Maximum: -10.0 dBm
Input sensitivity:
Typical: -4.4 dBm
Table 2. AT-2450FTX and AT-2451FTX Series Network Adapter
Cards (Continued)