Allied Telesis AT-S63 - Manual (Page 236)

Chapter 16: SNMPv3
236 Section II: Advanced Features
4. Click the button next to the Notify Table entry that you want to delete,
and then click Remove.
A warning message is displayed.
5. Click OK.
6. To save your changes, return to the General tab and click Save
Changes.
Modifying a
Notify Table
Entry
To modify an entry in the SNMPv3 Notify Table, perform the following
procedure:
1. From the home page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 69 on page 205.
3. In the SNMPv3 section, click the button next to Configure Notify
Table, and then click Configure at the bottom of the tab.
The SNMPv3 Notify Table tab is shown in Figure 82 on page 234.
4. Click the button next to the table entry that you want to change and
then click Modify.
The Modify SNMPv3 Notify page is shown in Figure 84.
Figure 84. Modify SNMPv3 Notify Page
5. In the Notify Tag field, enter a description name of the Notify Tag.
Enter a name of up to 32 alphnumeric characters.
6. In the Notify Type field, enter one of the following message types: