Allied Telesis AT-VIEW PLUS 3.1 DEVICE MANAGER - Manual (Page 74)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
To set a threshold, enter a threshold value in the Value field, then click OK. Note that this
specifies a rising threshold which triggers an event when the variable's value increases to exceed
the threshold, i.e. crosses the threshold from below.
When the threshold is reached, a pop-up message is displayed or a predefined command is
executed. You can select which action is executed in the Option > Option > User Action tab.
Note - Thresholds can only be used for variables of type GAUGE, INTEGER, COUNTER,
GAUGE32, INTEGER32, COUNTER32, or COUNTER64.
6 MIB Variable Window
PN 613-50664-00 Rev B Page 74 of 118