Allied Telesis AT-VIEW PLUS 3.0 AMIGO - Manual (Page 13)

Allied Telesyn AT-VIEW PLUS
AMIGO
2.2 Configuring AMIGO
AMIGO's general configuration can be changed from the File > Property menu. This includes MIB
files, target IP addresses or host names, web browser settings, and window layout settings.
When you first run AMIGO, a dialog box opens in which you can enter these settings. By default,
you can browse the MIB-II tree only. If this is all you require, click Cancel to close the dialog box.
This configuration can be changed later.
Configuration window for AMIGO
When you start AMIGO from AT-View Plus Device Manager, AMIGO automatically configures
this information according to the target device.
2 Starting AMIGO
PN 613-50662-00 Rev A Page 13 of 43