Allied Telesis AT-VIEW PLUS 3.0 DEVICE MANAGER - Manual (Page 16)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
Starting from SNMPc
Note - SNMPv3: In order to start AT-View Plus Device Manager in SNMPv3 mode, the node's
Read/Write Access Mode attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP
V3 Auth-SHA, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3
settings configured on the target device.
2.2.2 Starting From HP OpenView Network Node Manager
To start AT-View Plus Device Manager from HP OpenView, select a node on the map window, then
select AT-View Plus > Device Manager from the Tools menu.
PN 613-50664-00 Rev A Page 16 of 127