Allied Telesis AT-WA7501 - Manual (Page 258)

Chapter 8: Managing, Troubleshooting, and Upgrading Access Points
258
To use radio MAC ping
1. From the menu, click Maintenance > AP Connections. The AP
Connections screen appears. All devices that support a radio MAC
ping will have their MAC address listed with a hyperlink.
2. Click a MAC address hyperlink. The access point pings the device,
and then this screen appears showing the results.
By default, the Refresh Mode is Manual. To configure the software to
refresh automatically at a set interval, click 10 Sec or 1 Min.
By default, the Pings per refresh is None. To increase the number of
pings that occur after each refresh, click 25 or 100.