Allied Telesis AT-GS924 - Manual (Page 31)

AT-GS916 and AT-GS924 Gigabit Ethernet Switches Installation Guide
31
3. Secure the cord by lowering the power cord retaining clip, as
illustrated in Figure 16.
Figure 16 Securing the Power Cord with the Retaining Clip
4. Plug the other end or the power cord into a wall outlet.
5. Verify that the POWER LED is green. If the LED is OFF, refer to
”Troubleshooting” on page 33.
The switch is ready for network operations.
100-240V
AC ~