Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGER - Manual (Page 8)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGER
2 Starting AT-View Plus Device Manager
AT-View Plus Device Manager can be started in two ways, from the command line or from a
network management application.
When started, AT-View Plus Device Manager identifies the target device after you enter its IP
address. AT-View Plus Device Manager will then display the main panel of that device.
Note - In Windows environments, AT-View Plus Device Manager can also be launched from the
Start menu or from the Run command in the File menu.
Topics:
• Starting From the Command Line
• Starting From a Network Management Application
2 Starting AT-View Plus Device Manager
PN 613-50504-00 Rev D Page 8 of 119