Allied Telesis AT-VIEW PLUS 2.4 DEVICE MANAGEMENT User Manual

Page 94

Advertising
background image

Allied Telesyn

AT-VIEW PLUS

DEVICE MANAGEMENT

Note

- The current firmware version does not allow the following parameters to be

configured:

•

Max VPC

•

Max VCC

•

Max Active VPI Bits

•

Max Active VCI Bits

•

ILMI VPI

•

ILMI VCI

•

Neighbor IP Address

•

Neighbor Name


Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: gen Error."


Interface DS3 PLCP

Displays DS3 PLCP configuration and state parameters.

Note

- The Interface DS3 PLCP sub-menu option does not display the correct parameters.

Instead, it displays the sub-menu option name as a parameter with a value of 'noSuchName'.


Interface TC Sublayer

Displays TC Sublayer configuration and state parameters.

Note

- The Interface TC Sublayer sub-menu option does not display the correct parameters.

Instead, it displays the sub-menu option name as a parameter with a value of 'noSuchName'.


Traffic Descriptor

Displays information on the ATM traffic descriptor type and its associated parameters.

Note

- The current firmware version does not allow the following parameters to be

configured:

•

Type

•

Parameter 1

•

Parameter 2

•

Parameter 3

•

Parameter 4

•

Parameter 5

•

QoS Class

•

Status


Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: gen Error."


Virtual Path Link (VPL)

PN 613-50507-00 Rev D

Page 94 of 253

Advertising