Make sure that the link ok leds light green. if, Making 10base-fl uplink port connections, Connect the 10base-fl cables (either sc or st) – Allied Telesis AT-MR840TF User Manual

Page 32: Make sure that the link led for the fiber uplin, Making cascading connections, From the first hub, connect port 8 to any of th, Make sure the mdi/mdi-x switch for port 8 is se, If you cascade two hubs using port 8, make sure

Advertising
Make sure that the link ok leds light green. if, Making 10base-fl uplink port connections, Connect the 10base-fl cables (either sc or st) | Make sure that the link led for the fiber uplin, Making cascading connections, From the first hub, connect port 8 to any of th, Make sure the mdi/mdi-x switch for port 8 is se, If you cascade two hubs using port 8, make sure | Allied Telesis AT-MR840TF User Manual | Page 32 / 48 Make sure that the link ok leds light green. if, Making 10base-fl uplink port connections, Connect the 10base-fl cables (either sc or st) | Make sure that the link led for the fiber uplin, Making cascading connections, From the first hub, connect port 8 to any of th, Make sure the mdi/mdi-x switch for port 8 is se, If you cascade two hubs using port 8, make sure | Allied Telesis AT-MR840TF User Manual | Page 32 / 48
Advertising
See also other documents in the category Allied Telesis Computer hardware: