Allied Telesis AT-FS704 - Manual (Page 23)

7
Chapter 2
Installation
Before you Proceed
Before installing the AT-FS704, make sure you read “Electrical Safety and
Installation Requirements” on page iii.
Verifying Package Contents
Make sure that the package includes the following items:
❑ One AT-FS704 10/100 Fast Ethernet Switch
❑ One AC power cord (for the U.S., Continental Europe, and the U.K.
only)
❑ Warranty card
❑ This installation guide
❑ Four rubber feet with adhesive backing (for desktop or shelf
installation only)
❑ Wall mounting kit, which includes: two tapping screws and two plastic
anchors
If any of the above items are damaged or missing, contact your representative
immediately.