Allied Telesis FastSwitch8 - Manual (Page 9)

FastSwitch8 Installation Guide
3
Physical Description
Front Panel
The LanEdge FastSwitch8 front panel consists of Power and Port LED
indicators, as shown in Figure 2.
Figure 2 FastSwitch8 Front Panel defined
Rear Panel
The rear panel of the switch (shown in Figure 3) contains seven 10/100 Mbps
MDI-X (Media Dependent Interface with Crossover) ports and one MDI-X/MDI
port (port 8). Eight dip switches on the rear panel are used to specify the “Link
Mode” for each UTP/STP port. Also on the rear panel are the power adapter
connector and the Normal/Uplink switch for configuring port 8.
Figure 3 Rear Panel View of the FastSwitch8
Port LED Indicators
Power LED
DC Power
10/100M Ports (MDI-X)
Uplink /
Adapter
Normal
Connector
DIP Settings
RESET
1 2 3 4 5 6 7 8
Switch