Allied Telesis AT-8116 - Manual (Page 71)

AT-8116 User’s Guide
14-3
set-prt-prio
This command sets the Spanning Tree port priority. port_number is
the decimal port number, and port_priority is an integer in the range
1..255.
set-prt-prio <port_number> <port_priority>
set-prt-enb
set-prt-enb <port_number> {enable|disable}
This command enables or disables a port in the Spanning Tree.
port_number is the integer port number.
set-prt-pcost
set-prt-pcost <port_number> <path_cost>
This command sets the Spanning Tree port path cost. port_number
is the integer port number, and path_cost is an integer path cost in
the range 1..65535.