Allied Telesis AT-S21 - Manual (Page 48)

7HUPLQDO#&RQILJXUDWLRQ
3-16
Enter the letter corresponding to your choice if choices are
preceded by letters. For example, if your choices are:
Enter A for IP address or B for subnet mask.
Enter the letter corresponding to your choice if choices are
preceded by numbers. For example, if your choices are:
Enter 1 for Port 1 - Room 1147, 2 for Port 2 -
Room 1148 , or 3 for Port 3.
7HUPLQDO#6HWWLQJV
Data bits, stop bits, and parity: Defaults of 8 data bits, 1 stop bit,
and No parity are provided.
Transmission mode: Full-duplex (echo), the default, means data
travels in both directions. Half-duplex (no echo) means data travels
in only one direction at a time.
Data rate (baud rates): The default is automatic baud rate
detection. You can also select from the following fixed baud rates:
❑ 19200 bps
❑ 9600 bps (recommended setting for fixed baud rate)
❑ 4800 bps
❑ 2400 bps
❑ 1200 bps
❑ 600 bps
❑ 300 bps
❑ 150 bps
❑ 75 bps
❑ Automatic baud rate detection
Return to Main Menu.
A: IP address:Null (not configured)
B: Subnet mask:Null (not configured)
C: Gateway address:Null (not configured)
D: Domain Name Server:Null (not configured)
E: Default Domain Name:Null (not configured)
1: Port 1 - Room 1147
2: Port 2 - Room 1148
3: