Allied Telesis FORMULA 8200 - Manual (Page 13)

FORMULA 8200 Fiber Switch Installation Guide
9
Table 2: Default Fiber Switch’s Parameters
Parameter Default Value
System login admin
System password switch
Admin Status Enabled
IP Address 0.0.0.0
IP Subnet Mask Address 0.0.0.0
Default Gateway Address 0.0.0.0
Spanning Tree Protocol Enabled
Port Path Cost 10
Port Priority 128
Half or Full Duplex Full duplex on FX ports
Port Speed 100 Mbps on FX ports
Autonegotiation Off; not applicable to FX ports
Spanning Tree Priority 32768
Active Aging Time 300 seconds
Hello Time 2 seconds
IP RIP Mode Silent
VLAN All ports to a default VLAN #1
Console 9600, 8, N, 1
Fiber_Book Page 9 Tuesday, February 17, 1998 1:43 PM