ADC ClearGain Dual Inline Tower Mounted Amplifier System - Manual (Page 5)

ADCP-75-214 • Issue 2 • September 2006 • Preface
Page v
© 2006, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This document describes the ADC ClearGain 1800 and 2100 MHz Dual Inline Tower Mounted
Amplifier (TMA) Systems and provides complete instructions for installing these products on a
communications tower.
ADMONISHMENTS
Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
CERTIFICATION
The ClearGain 1800 and 2100 MHz Dual Inline TMA have been tested and found to comply with the
requirements of EN60950.
The ClearGain 1800 and 2100 MHz Dual Inline TMA have been tested and found to comply with all
applicable CE Directives.
STANDARDS
The following is a listing of applicable regulatory standards:
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.
Safety EN60950
EMC ETSI 300-342-2
Storage ETSI 300 019-1-1
Transport ETSI 300 019-1-2
Operation ETSI 300 019-1-4