Allied Telesis AT-S10 TurboStack - Manual (Page 34)

Management Menus
24
As primary port, Port 13 is enabled and actively receives and transmits
packets. Port 1 is disabled until Port 13 fails. A secondary port’s port
configuration screen may be similar to the following example (partially
shown):
Press Return to go to the Port Status screen and to view the port list,
which may be similar to the following example:
As you can see on the Port Status screen sample, redundant pair
configuration writes over any previously-assigned port names. This
enables you to see what ports you have paired together. If you want to
change the name, it may be a good idea to use a name that also maintains
their redundancy function (see “Change Port Name” on page 19 for the
procedure).
NOTE
The software allows you to manually change the status of a redundant port.
However, checks performed by the redundant link feature may
immediately change the status again.
You are done with redundant pair configuration. You may proceed with the
physical connections from your redundant ports to the network resource.
Sunnyvale
Module 1 — Accounting A
Port 1 - Secondary port ->13
Link State:Online
Partitioning State:Disabled/RL
Polarity:Normal
Sunnyvale
Module 1—Accounting A
Port Status
Port MAC Address Link Status MAC Learning
1: Secondary port->13 -- Online Disabled/RL Disabled
2: Room 1149 0000F4 C02789 Online Normal Enabled
3: Room 1150 0000F4 D0D070 Online Normal Enabled
4: Room 1151 00805F 84239F Online Normal Enabled
5: 00805F 4810F2 Online Normal Enabled
6: 000094 4514A6 Online Normal Enabled
7: 00805F E49A0B Online Normal Enabled
8: 080009 984673 Online Normal Enabled
9: 0000F4 D09603 Online Normal Enabled
10: 0000F4 C00520 Online Normal Enabled
11: 080020 681B97 Online Normal Enabled
12: 0080C7 68A081 Online Normal Enabled
13: Primary port->1 -- Online Normal/RL Disabled
Enter a port number to change a port’s configuration
- or hit Return to continue with no changes
->
Redundant
pair