Allied Telesis AT-S39 - Manual (Page 44)

AT-S39 User’s Guide
44
Resetting a Switch
To reset a switch, perform the following procedure:
1. From the Main Menu, type 4 to select Administrator Menu.
2. From the Administrator Menu, type 9 to select Reset Switch.
The following prompt is displayed:
Do you want to proceed with the switch reboot?
[Yes/No] ->
3. Type Y to reset the switch or N to cancel this procedure.
The following prompt is displayed:
Please press <ENTER> key TWICE to proceed with the
Switch Reset...
4. Press the Return key twice.
The switch reloads its operating system, a task requiring
approximately 20 seconds to complete.
Caution
The switch will not forward traffic during the brief period required to
reload its operating software. Some data traffic may be lost.