Allied Telesis AT-A24/SX, LX - Manual (Page 19)

1000Base Expansion Module Quick Install Guide
9
3. Slide the new GBIC module into the expansion slot and push it in until it
clicks. Refer to Figure 4.
Figure 4 Installing a GBIC Module
4. Remove the dust cover and attach the fiber cables. It is important to leave
the dust cover in place if you are not attaching the cables at this time. Dust
in the ports can degrade transmission.
The expansion module is now ready for use.
A
B
AT-A15
1000BASE-X
LINK
ACTIVITY
FULL DUP
HALF DUP COL