Advanced feature licence at-rpfl3upgrade – Allied Telesis Rapier Switch User Manual
Page 9
Introduction
9
Rapier Switch Software Release 2.2.1
C613-02013-00 Rev A
■
Telnet client and server.
■
A sophisticated and configurable event logging facility for monitoring and
alarm notification to single or multiple management centres.
■
Triggers for automatic and timed execution of commands in response to
events.
■
Scripting for automated configuration and centralised management of
configurations.
■
Dynamic Host Configuration Protocol (DHCP) for automatically assigning
IP addresses and other configuration information to PCs and other hosts
on TCP/IP networks.
■
Group management support for IP multicasting: IGMP version 2.
■
Support for the Simple Network Management Protocol (SNMP), standard
MIBs and the Allied Telesyn Enterprise MIB, enabling the switch to be
managed by a separate SNMP management station.
■
An HTTP client that allows files to be downloaded directly from a web
server to the switch’s FLASH memory, and an HTTP server that serves web
pages from FLASH.
For a complete description of the switch’s routing software, see the Rapier
Switch Software Reference. Note that the Software Reference uses the word
“router” for the switch when it describes routing features.
Advanced Feature Licence AT-RPFL3Upgrade
If you purchased the advanced feature licence AT-RPFL3Upgrade, you can also
use the following features on your switch:
■
IP Multicast routing: DVMRP and PIM-Sparse Mode
■
IPX routing
■
Demand IPX
■
IPX/SPX Spoofing
■
IPX Filtering (not between switch ports)
■
AppleTalk routing
■
Resource Reservation Protocol (RSVP).