Spire JEWEL BLACK 650W / SP-ATX-650WTB-PFC-1 - Manual (Page 15)

Version:A/0 Page 15 of 18
Spire Corp.
Http://www.spirepower.com & Http://www.spirecoolers.com
Http://www.spire-corp.com
6 Reliability
6.1 Component Derating
The following component derating guedelines are recommended:
‧
Semiconductor junction temperatrues shall not exceed 110℃ with an ambient
of 50℃.
‧
Inductor case temperature shall not exceed safety agency requirements.
‧ Capacitor case temperature shall not exceed 95% of rated temperature.
‧ Component voltage and current derating shall be >10% at 50℃.
‧ Magnetic saturation of any transformer will not be allowed under any line, load,
startup or transient condition including 100% transients on the five main outputs or
+5VSB.
6.2 Mean Time Between Failures(MTBF)
The power supply reliability is based on the calculation with the Part-Stress Analysis
method of MIL-HDBK-217F using the quality factors listed in
MIL-HDBK-217F. The power supply MTBF is 100,000 hours under the
following conditions:
- Full-rated
load
- 230VAC
input
- Ground
begin
- 25℃ ambient
7. Correlative Certification compliance
Item # Certification type
Certification
Number
Certification listing Remark
1 CE
NEI-EMC-1-0801C
190
NEUTRON ENGINEERING
INC
2 ROHS
WT06060878A1-S-
R
WWW.WALTEK.COM.CN
3 TUV R 50126708 WWW.TUV.COM/SAFETY