Alpine CVA-1003R - Manual (Page 41)

39
-EN
Other Useful Features
Adjusting Source Signal Levels
If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 5 button to select the FM
setting mode. Press the Preset 5 button again to
select FM LEVEL.
To set another setting, press the Preset 5 button
or another Preset button.
3
Press the g DN or f UP button to select
the FM signal level HIGH or LOW to make the
signal levels between the FM band and CD
player closer.
To set another setting, press the Preset 5 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
Switching the Tuner Mode
The CVA-1003R incorporates the MAX TUNE
PRO for the highest quality tuner audio. Moreover,
you can choose between two settings to suit your
own personal sound preferences usage.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 5 button to activate the FM
setting mode. Press the Preset 5 button again to
select CONDITION.
3
Press the g DN or f UP button to select
the desired setting.
HI-FI: Sound quality priority setting
NORMAL: Standard setting
STABLE: Noiseless priority setting
To set another setting, press the Preset 5 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
Subwoofer Control On and Off
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
2
Press the Preset 6 button to set to the SYSTEM
setting mode. Press the Preset 6 button again to
select the SUB W. mode.
3
Press the g DN or f UP button to select
Subwoofer ON or OFF.
To set another setting, press the Preset 6 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
NOTES
• Initial mode is "Subwoofer ON."
• Set to "Subwoofer OFF" unless the subwoofer is used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader.