Swiftech MCW20 A User Manual
Page 2
K n u rle d kn o b
S p rin g
Te n s io n lim ite r
fla n g e fa c in g d o
4 - 4 0 m in i-n u t
b la c k fib e r w a s h e
b la c k fib e r w a s h e r
4 - 4 0 x 1 1 /2 “ p h ilip s s
4.
Connect the block to the rest of the cooling circuit.
The block is designed in such a way that it will bleed itself automatically in any vertical orientation (computer standing-up) .
5. Type
of
Coolant:
a) For best performance, use 95% distilled water, and 5% Swiftech brand “HydrX” corrosion inhibitor (available here:
, under the “accessories” section).
b) In ALL cases, you MUST use Distilled water AND a corrosion inhibitor with the MCW5002 water-block. Regular automotive anti-freeze is
acceptable. Automotive manufacturers recommend that not less than 25% is used.
c)
NEVER use tap water, even for a short-term test.
d) Not following paragraphs b and c above constitutes misuse (*) of the product, and will void your warranty.
6.
Final inspection
Once the installation is completed, it is always a good idea to test the circuit for leaks, prior to powering up the computer. Troubleshooting
help is available on our
, or by calling customer support at 562-595-8009.
Note concerning removal of the tubing
: Push in collet squarely against face of fitting, using swiftech’s tube removal tool, or a wrench of
approximately the same opening diameter as the tube (1/2” +). With the collet firmly held against the face of the fitting, the tube can be safely pulled out. Do
not attempt to pull the tube out without pushing squarely against the collet. This may result in damaging the fitting.
IMPORTANT DISCLOSURES
While all efforts have been made to provide the most comprehensive tutorial possible, Swiftech assumes no liability expressed or implied for any
damage(s) occurring to your components as a result of using Swiftech cooling products, either due to mistake or omission on our part in the above
instructions, or due to failure or defect in the Swiftech cooling products.
WARRANTY
Our products are guaranteed for 12 months from the date of delivery to the final user against defects in materials or workmanship. During this period,
they will be repaired or have parts replaced provided that: (I) the product is returned to the agent from which it was purchased; (II) the product has
been purchased by the end user and not used for hire purposes; (III) the product has not been misused
(*)
, handled carelessly, or other than in
accordance with any instructions provided with respect to its use. This guarantee does not confer rights other than those expressly set out above and
does not cover any claims for consequential loss or damage. This guarantee is offered as an extra benefit and does not affect your statutory rights as a
consumer.
Page 2 of 2