Single radiator system illustration – Swiftech H20 8600 User Manual
Page 9
Figure 6
Figure 6 above illustrates a final installation, showing the MCR80-F2 radiator in place, the MCW6000 CPU cooler, the MCW50 VGA cooler, the
MCW20 chipset cooler, and the MCP600 pump. Notice how the Coolsleeves coils allow tight bends, keeping a “clean” uncluttered arrangement of
the circuit. In this particular chassis, the radiator is positioned slightly lower relative to the CPU. As a result, we installed the components in the
following sequence: VGA cooler -> Chipset cooler -> Radiator -> CPU cooler.
Rouchon Industries, Inc., dbA Swiftech™ – 1703 E. 28
th
St, signal Hill, CA 90755, USA – T (562) 595-8009 – F (562) 595-8769 – All content Copyright
Swiftech 2004 – Last edited 5-5-04– Subject to revision without notice
- 9 of 36 -