Spektrum SPMA9590 - Manual (Page 4)

EN
4
Binding
Please refer to your transmitter, receiver, STi ™ (SPMTR1000) or telemetry module
(TM1000) manuals for binding instructions. For sensor compatibility, please refer
to the item product page on spektrumrc.com or horizonhobby.com.
Installation
The High-Current Sensor is designed to easily install between any aircraft ESC
and battery using EC3
™ connectors. The sensor reports instantaneous amperage
and is capable of 60 continuous amps in the stock configuration (EC3 connectors
/13 AWG are a limiting factor).
The user will have 150-amp maximum capability when the wire leads are directly
soldered to the High-Current Sensor PCBA.