Spektrum SPMAR7200BX - Manual (Page 18)

EN
18
N. Setting the pirouette optimization Direction.
1. Note the direction the swashplate tilts when entering menu point (N). The
swashplate will tilt forward or back; the direction does not matter.
2. Hold the helicopter at the rotor head and spin the helicopter by hand around
the main shaft.
3. The swashplate should remain in the same tilt direction regardless of the
rotational direction of the helicopter.
4. If the swashplate changes direction and rotates against the direction of the
helicopter, use the rudder stick to change the direction.
5. Push the setup button to save the selection and exit the Setup Menu (N).
The setup steps of the AR7200BX are finished. It is now necessary to continue
setting up the dials and parameters options.
*=Factory
Setting
Status-LED Pirouette Optimization Direction
Red Solid Normal*
Blue Solid Reversed