Spektrum SPMAR6400NBL - Manual (Page 4)

EN
4
Receiver Installation
We recommend using double-sided foam tape strips and/or minimal hot glue
in the corners to install your receiver in the fuselage. The servos must be in the
appropriate position to attach to and drive the elevator and rudder pushrods.
Installation will vary depending upon application.
Servos
Specially designed servos are available through Spektrum.
NotICE: Using any other servo(s) may cause damage to the receiver and/or
void the servo warranty.
Optional Servos (SPMAS2000/SPMAS2000L)
AR6400NBL Features and Ports
Antenna
Rudder (CH4) Servo
Elevator (CH3) Servo
X-Port (all 4 pins)
OR
Gear (CH5) (3 pins to the left)
Reversed Aileron
(CH2) or Aux1 (CH6)
Battery Input
Aileron (CH2)
Brushless
Motor Leads