ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 137)

Appendix
125
3. Select the KM0032 / KM0532 / KM0932 in the Device List.
Note: 1. The computer that you run this program from must be on the same
network segment as the KM0032 / KM0532 / KM0932 you want
to configure.
2. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
3. If there is more than one device in the list, use the MAC address
to pick the one you want. The KM0032 / KM0532 / KM0932's
MAC address is located on its bottom panel.
4. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit.
Browser
1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the KM0032 / KM0532 / KM0932.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the KM0032 / KM0532 / KM0932 that is
suitable for the network segment that it resides on.
4. After you log out, reset your computer's IP address to its original value.