Audiovox GMRS2VMK - Manual (Page 11)

Powering the Charger with the Cigarette Lighter Adapter
The GMRS2VMK Fast Intelligent Charger obtains its operating power us-
ing the Cigarette Lighter Adapter. Use the following procedure to connect
the charger to input power:
1. Insert the GMRS2VMK Cigarette Lighter Adapter connector into
the charger base by aligning it with the pins on the connector on
the back of the charger base.
2. Press down on the connector locking tab and press the connec-
tor into place. The connector will lock in place.
3. Connect the GMRS2VMK Cigarette Lighter Adapter connector to a
standard +12 Volt DC power outlet.
4. To release the connector, lift the locking tab and remove the
connector form the charger base.
Fast Intelligent
Charger Rear View
Charger Base 2-Pin Locking
Tab
Cigarette Lighter
Adapter Cable
Connect
to a +12VDC
Source
Power LED
Indicator
NOTE
The GMRS2VMK Cigarette Lighter Adapter is equipped with a 2-Amp
fuse mounted beneath the removable cover assembly.
Fuse
Cover
11