Savin 4800WD - Manual (Page 40)

Copying
30
2
Manual paper select
AAAA
Select the paper tray or paper by-
pass.
The selected tray key is highlight-
ed.
❖ ❖ ❖ ❖ When the lower tray (paper roll
tray) is installed
❖ ❖ ❖ ❖ When the cut paper trays are
installed
- - - -Rotate Copy
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation (
K
or L ) is different to that of the paper
loaded in the cut paper trays, this
function rotates the original image by
90 degrees, to fit it onto the copy pa-
per.
Note
❒ This function works when Auto
Paper Select is selected. See p.29
“Selecting Copy Paper”.
❒ The default for Auto Tray Switch-
ing is With image rotation. You
cannot use Rotate Copy if this set-
ting is changed to Without image
rotation or Off. See p.83 “Auto
Tray Switching”.
Setting the Length of Copy
Paper Cut
Preparation
The following paper cut methods
are available.
❖ ❖ ❖ ❖ Synchro Cut
Cuts the paper at the same
length as the original.
If the copy is enlarged or re-
duced, the machine calculates
the appropriate length for the
magnification ratio and cuts the
paper.
GCROTA0E
DolphinC2_ENcopy_F_FM.book Page 30 Friday, February 25, 2005 10:46 AM