Altinex MT113-102/103 - Manual (Page 13)

MULTI-TASKER
13
13
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
Example:
If the status of audio card 2 of unit zero is as
follows:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:8
BASS:8
TREBLE:14
LOUDNESS:ON
After sending a command [VTL2CnUi] on
request [C2] we will the new status of card 2:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:8
BASS:8
TREBLE:2
LOUDNESS:ON
[VTLYGkUi]
This command sets absolute treble level for a
group of cards. Command Format: [VTLYGkUi]
Y = Absolute treble level (Y = 0 to F in hex
format)
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
Example:
If card 1, 2, and 3 are grouped as group 5 of
unit 1, send the [VTLFG5U1] command to set
maximum volume of treble for card 1, 2, and 3
simultaneously.
12. [LOD0CnUi]
This command turns OFF loudness feature for
single card.
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
[LOD1CnUi]
This command turns ON loudness feature for
group of cards simultaneously.
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
[LOD1GkUi]
This command turns ON loudness feature for
single card.
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
[LOD0GkUi]
This command turns OFF loudness feature for
group of cards simultaneously.
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
13. [MUT0CnUi]
This command turns ON speaker output.
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
14. [MUT1CnUi]
This command turns OFF speaker output.
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
15. [WR….GkUi]
This command groups multiple cards in the
MT100-100 Enclosure. Each unit contains a
maximum of nine groups. Command Format:
[WRCn…GkUi]
n = card ID No. (n = slot # from 1 to 19)
k = group number (k = # from 1-9)
i = unit number (i = # from 0-9)
Example:
To group card #1, 2, and 3 as group 5 of unit
#1, send the [WRC1C2C3G5U1] command.
After executing this command, cards 1, 2, and 3
of unit 1 will be grouped together as group 5.
16. [CLR]
This command clears the members for a single
group or for all nine groups. Command Format:
[CLRGkUi]
k = group number (k = # from 1-9)
i = unit number (i = # from 0-9)
Example:
To clear group #1, send the [CLRG1U1]
command. This command clears the members
for the specified group only.