The label on the rear panel of the xav101, The label on the rear panel of the xav101 -4 – NETGEAR XAV101 User Manual

Page 14

Advertising
background image

XAV101 Powerline AV Ethernet Adapter User Guide

1-4

Installation and Basic Configuration

v1.0, April 2008

The Label on the Rear Panel of the XAV101

The label on the rear panel of the XAV101 contains the items listed below.

•

Model number

•

MAC address

•

Serial number

•

Device password (PWD)

Preparing to Install Your Powerline AV Ethernet Adapter

To prepare for installation:

1. Before you begin, verify the following:

•

Your Ethernet network is set up, and an Ethernet port is available on your router.

•

Your Internet connection is working.

•

Each computer that will use the Powerline AV Ethernet Adapter has an Ethernet port
available and is configured to work on your network. Usually, the default configuration
settings (TCP/IP and DHCP) are fine.

2. Familiarize yourself with the Powerline AV Ethernet Adapter. The front panel has three lights:

Power, Powerline, and Ethernet. The side panel has a Security button, a Reset button, and an
Ethernet port.

3. Plan the location of your Powerline devices:

Security button

Configure security (see

“Using the Security Button to Change the Encryption Key in

Your Network” on page 1-7

).

Reset button

To reset, use a sharp object such as a pen or a paper clip to briefly press this button
(for 2 seconds). The adapter automatically returns to factory default settings, and
then restarts.
Note: Pressing the reset button longer than recommended might interfere with
resetting the adapter.

10/100 Ethernet port Use this port to connect the adapter to a router, computer, or other peripheral device.

Table 1-1.

Powerline AV Ethernet Adapter

Description (continued)

Item

Description (continued)

Advertising