AEG KF 2061 AROMA - Manual (Page 7)

g
12
KF 2062 Timer (Figure 2c)
0 Press the on/off button (Figure 2c/G).
The indicator (red) (Figure 2c/F) is illu-
minated and the brewing procedure
will start.
Preparing small quantities of coffee
(2-4 cups)
Your coffee machine has an aroma
button (Figure 2c/J). The aroma setting
guarantees full coffee enjoyment even
with small quantities (2-4 cups).
0 Press the aroma button (Figure 2c/J).
The symbol will appear in the dis-
play (Figure 2c/A). To cancel the
selected quantity 2-4 cups, press the
aroma button again. The symbol
will go out in the display. Start and end
the brewing procedure as described
above.
Preparing coffee using the timer
Your appliance has a timer with which
you can programme the start of the
brewing procedure up to 24 hours in
advance.
First set the current time. The display
(Figure 2c/A) will flash “00:00”.
0 Press the button for HOURS
(Figure 2c/B) for approx. 2 seconds
and hold it down until the correct time
is shown in the display (Figure 2c/A).
0 Press the button for MINUTES
(Figure 2c/C) and proceed as for
setting the hours.
Set the time at which you wish the
brewing procedure to start.
0 Press the programme button
(Figure 2c/H).
0 Press the button for HOURS
(Figure 2c/B) and set the hours.
0 Press the button for MINUTES
(Figure 2c/C) and set the minutes.
0 Press the AUTO-START button
(Figure 2c/D).
The display for AUTO-START
(Figure 2c/E) is illuminated. The pro-
grammed start time will go out in the
display and the current time will reap-
pear. The brewing procedure will start
automatically at the starting time you
have programmed. The indicator (red)
(Figure 2c/F) is illuminated.
To check the programmed start time,
press the programme button
(Figure 2c/H). The start time will
appear in the display (Figure 2c/A).
After a few seconds it will go out
and the current time will reappear.
If you wish to cancel the selected start
time, press the button for AUTO-START
(Figure 2c/D). The green display for
AUTO-START (Figure 2c/E) will go out.
Important: If there is a brief power
failure of up to 5 seconds the data
remains stored. In the event of a longer
power failure the entered data is
erased and the time and start time
must be reprogrammed as described
above.
Important: Once a start time has been
programmed, your coffee machine will
automatically start a brewing proce-
dure every 24 hours as long as the
display (green) for AUTO-START
(Figure 2c/E) is illuminated.
You can also use the “2-4 cups”
aroma function when a start time is
programmed!
0 Once the brewing procedure has been
completed and you no longer require
the warming plate function, switch the
appliance off by pressing the on/off
button again. The indicator will go out.
Auto shut off
Your coffee machine has a safety cut-
out. If the appliance is not used for
2 hours after the brewing procedure
has started it switches off automati-
cally for safety reasons and also to save
energy. The indicator (red) (Figure c/F)
will go out.