Avery FRESHMARX 9415 - Manual (Page 18)

3-2 Operator’s Handbook
C l e a r i n g L a b e l J a m s
To clear a jam:
1. Lower the supply door.
2. Remove any previously loaded labels.
3. Slide the roll of labels off the supply holder.
4. Remove the jammed labels.
Caution: Do not use sharp or pointed objects to
remove labels. It may damage the printer.
5. Reload the labels. See “Loading Labels” in
Chapter 1 for more information.
6. Close the supply door.
7. Press to calibrate the labels.