Avaya Quick Charger PTQ360 User Manual

The avaya quick charger user guide

Advertising
background image

The Avaya Quick Charger User
Guide

The PTQ360 Quick Charger will recharge a sin-
gle NiCd (Nickel Cadmium) or NiMH (Nickel
Metal Hydride) battery in 60-90 minutes. Note
these precautions:

•

To ensure proper charging and prevent dam-
age, the Battery Pack should be at room tem-
perature (between 50° and 85° F, 10° and
30° C) when charging.

•

Do not place the charger where it is subject
to extreme temperature variations, such as
sunny windows or heating/cooling vents.

•

Flashing yellow—the Quick Charger is test-
ing and conditioning the Battery Pack. This
test/condition mode is automatically started
every 11th cycle of the charger. Testing the
NiCd Standard Battery Pack takes approxi-
mately four hours; testing the NiMH High
Capacity Battery Pack takes approximately
8-10 hours.

To manually start the test, press the MODE but-
ton. To stop the test, press the MODE button.
However, it is highly recommended that the test
be allowed to complete.

Battery Pack Bins

If a Wireless Telephone is to be used during the
recharging cycle, fully charged Battery Packs must
always be available. Therefore, it is recommended
that a bin is available to collect discharged Battery
Packs and a second bin for charged Battery Packs.
Users can quickly replace their discharged Battery

IMPORTANT

•

Replacement Battery Packs are available from your

supplier or servicing agent.

•

Never use non-[OEM] charging units as they
could damage the Battery Pack.

•

Only use the original [OEM] plug-in power adapter.

•

Do not dip the Battery Pack in water or throw into fire.

•

It is normal for the Battery Pack to become warm
when charging.

•

Recycle or dispose of Battery Packs according to local
requirements.

•

Do not immerse the Charger in water or other liquid.

Pack with a charged one. An assigned person can
recharge the Battery Packs and move them to the
charged bin as they are recharged. It is also rec-
ommended that the bins be non-metallic and clear-
ly labeled to identify whether they are intended for
charged or discharged Battery Packs.

© 2005 Avaya, Inc.
All Rights Reserved
Printed inUSA

555-301-703

Issue 2

Feburary 2005

Doc PN 72-8360-01-B

Advertising