Nikon COOLPIX-P100 - Manual (Page 47)

35
Using the Flash
B
a
sic Ph
ot
og
raph
y
an
d Pl
ay
back
: A
(A
u
to
) Mo
de
Setting the Flash Mode
1
Press the m (flash pop-up) button.
The built-in flash will be raised.
• When the built-in flash is lowered, the flash mode will be fixed to W (off ).
2
Press
m (flash mode) on the multi selector.
• The flash mode menu is displayed.
3
Press
H or I on the multi selector to choose
the desired mode and press the
k button.
• The icon for the selected flash mode is displayed at the
top of the monitor.
• When U (auto) is applied, D is only displayed for a
few seconds even if monitor indicators ( A15) are
turned on.
• If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
B
Lowering the Built-in Flash
When not using the built-in flash, gently push to lower the flash.
Flash mode
1/250 1/250 1/250 17 17 17 F5.6 F5.6 F5.6