Owner’s guide – Ultra Start 23xx User Manual

Page 6

Advertising
background image

Press and hold the UNLOCK button doors will unlock (optional). Continue
holding until the trunk release will activates.

* The trunk release will be confirmed by one park light flash and siren chirp.

Note: The trunk release output will not activate when the ignition key is in the

On position.

1.Press and release the LOCK button on the remote transmitter.
2.The park lights will flash and the siren will chirp one time.
3.The system will ARM and the doors will lock (optional).
4.The LEDs on the antenna will start flashing within five seconds.

Note: If installed, the starter disable will activate.

1.Press and release the UNLOCK button on the remote transmitter.
2.The park lights will flash and the siren will chirp two times.
3.The system will DISARM and the doors will unlock (optional).
4.The LEDs on the antenna will stop flashing.

Note: If installed, the starter disable will de-activate.

1.Press and release the LOCK & UNLOCK buttons at the same time.
2.If the system is armed and the doors are locked this will disarm and

unlock the doors without chirps. The park lights will flash two times
to confirm the doors have unlocked.

3.If the system is disarmed and the doors are unlocked this will arm and

lock the doors without chirps. The park lights will flash one time to
confirm the doors have locked.

Arm the Alarm (Lock Doors)*

Disarm the Alarm (Unlock Doors)*

Silent Arm/(Lock)* and Disarm/(Unlock)*

Trunk Release- Default Unlock Button

Page 6

Alarm Functions/Optional Features*

OWNER’S GUIDE

REMOTE VEHICLE STARTER

1. Press and hold the Lock button
2. The park lights will flash and the siren will chirp(aprox. 30 sec).
Panic Mode Disable:

-Press and release the Lock button or
-Press and release the Unlock button.

Note: Panic will be active until disabled by the remote transmitter.

Panic

Advertising
This manual is related to the following products: