Indesit VIA640C – for models from 10 Dec 2009 - Manual (Page 24)

24
GB
Installation
 Before operating your new appliance please read this
instruction booklet carefully. It contains important information
concerning the safe operation, installation and maintenance
of the appliance.
 Please keep these operating instructions for future
reference. Pass them on to any new owners of the appliance.
Positioning
 Keep all packaging material out of the reach of children. It
may present a choking or suffocation hazard (see Precautions
and tips).
 The appliance must be installed by a qualified professional in
accordance with the instructions provided. Incorrect
installation may cause harm to people and animals or may
damage property.
Built-in appliance
Use a suitable cabinet to ensure that the appliance functions
properly.
• The supporting surface must be heat-resistant up to a
temperature of approximately 100°C.
• If the appliance is to be installed above an oven, the oven
must be equipped with a forced ventilation cooling system.
• Avoid installing the hob above a dishwasher: if this cannot
be avoided, place a waterproof separation device between
the two appliances.
• Depending on the hob you want to install, the cabinet must
have the following dimensions (see figure):
560 +/- 1
490 +/- 1
53
590
520
Ventilation
To allow adequate ventilation and to avoid overheating of the
surrounding surfaces the hob should be positioned as follows:
• At a minimum distance of 40 mm from the back panel or
any other vertical surfaces.
• So that a minimum distance of 20 mm is maintained
between the installation cavity and the cabinet
underneath.
• Kitchen cabinets adjacent to the appliance and taller than
the top of the hob must be at least 600 mm from the edge
of the hob.
Fixing
The appliance must be installed on a perfectly level supporting
surface.
FRONT SIDE
OF HOB
SUPPORTING
SURFACE
30
40
UNDERSIDE
OF HOB
5 mm
min. 20 mm
min. 20 mm
min. 40 mm
COMPARTMENT
5 mm
min. 40 mm
FAN-ASSISTED
OVEN