Indesit IWDE-7145-B-(EU) - Manual (Page 7)

GB
7
Wash cycles and options
Wash options
- If the selected option is not compatible with the
programmed wash cycle, the indicator light will flash and
the option will not be activated.
- If the selected option is not compatible with another
option which has been selected previously, the indicator
light corresponding to the first option selected will flash and
only the second option will be activated; the indicator light
corresponding to the enabled option will remain lit.
Selecting this option enables you to suitably adjust drum
rotation, temperature and water to a reduced load of lightly
soiled cotton and synthetic fabrics (refer to the “Table of
wash cycles”). “
” enables you to wash in less time
thereby saving water and electricity. We suggest using a
liquid detergent suitably measured out to the load quantity.
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At
the end of the cycle the Washer-dryer will perform slow ro-
tations of the drum; the indicator lights for the EASY IRON
and START/PAUSE options will flash (the first one green,
the second orange). To end the cycle, press the START/
Table of wash cycles
PAUSE button or the EASY IRON button. For the 7 wash
cycle, the machine will end the cycle while the laundry is
soaking and the EASY IRON and START/PAUSE indicator
lights will flash.
To drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level “A1” (Iron dry).
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed. It
is particularly useful for sensitive skin.
Delay start
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text “OFF”
appears on the display.
The information contained in the table is intended as a guide only.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 2 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 2 with a temperature of 40°C.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max.
load
(kg)
Cycle
duration
Prewash
Main
wash
Fabric
softener
Daily
The duration of the wash cycles can be checked
on the display
.
1 Cotton with prewash: extremely soiled whites. 90° 1400     7
2 Cotton: extremely soiled whites. 90° 1400  -   7
2 Cotton (1): heavily soiled whites and resistant colours. 60° 1400  -   7
2 Cotton (2): lightly soiled whites and delicate colours. 40° 1400  -   7
3 Cotton: heavily soiled whites and resistant colours. 60° 1400  -   7
4 Coloured Cotton: lightly soiled whites and delicate colours. 40° 1400  -   7
5 Synthetics: lightly soiled resistant colours. 60° 800  -   3
Special
6 Wool: for wool, cashmere, etc. 40° 600 - -   1,5
7 Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 - -   1
8 Jeans 40° 800  -   3
9 Sport Light 30° 600 - -   3
10 Sport Shoes 30° 600 - -  
Max. 2
pairs
Drying
11 Cotton dry - -  - - - 5
12 Synthetics dry - -  - - - 3
13 Express Wash & Dry 30° 1400  -   0,5
Partial wash cycles
Rinse
- 1400  - -  7
Spin - 1400  - - - 7
Drain - 0 - - - - 7