ROTHENBERGER RODIACUT 131 DWS User Manual
Page 15
ENGLISH
11
2
Technical
Data
RODIACUT 131 DWS RODIACUT 202 DWS
Dimensions ( L x W x H ) in mm
430 x 250 x 750mm
620 x 240 x 970mm
Drill stroke max.:
450mm 650mm
Drilling range using the 1800 DWS drill motor Ш10 – Ш 131mm
---
Drilling range using the 2400 PD drill motor
---
Ш30 – Ш 202mm
Drilling depth without extension:
300 or 400 mm
300 or 400 mm
Motor receptacle
Ø 56 / 60 mm
Swallowtail guide
Weight
10 kg
14,5kg
3
Function of the equipment
3.1
Overview (Fig. A)
1
Locking device for feed gear
11
Hand adapter
2
Motor receptacle
12
Adjusting screws guide bars
3
Guide column
13
Hand grip
4
Depth stop
14
Star handle motor receptacle
5
Ring bolts
15
Motor receptacle stop position
6
Borehole centre indicator
16
Support
7
Toggle drilling angle adjustment
17
Transport wheels
8
Base plate
18
Levels
9
Ventilation button
19
Borehole for water extraction ring
10
Feed unit
As the system consists of coordinated components, please only use original ROTHENBERGER spare
parts, accessories and diamond drill bits in order to enable optimum efficiency of the equipment
at all times.
3.2
Start of operation
Positioning:
Please pay attention to the position of the ring bolts (5) Ring bolts must not overlap
the lower edge of the base plate.
Î
Measure borehole and mark the centre.
Î
Fold out the borehole centre indicator (6) and adjust and fasten the base plate (8)
The respective optimum fastening possibility depends on the building site conditions (see
fastening possibilities, item 3.3)
You can achieve the final fine alignment or adjustment of the drill rig by tightening the four
ring bolts (5) with the aid of both spirit levels (18)
Every time before start of operation make sure that the drill rig is firmly fastened
and not able to shake.