ROTHENBERGER Hydraulik-Expanderanlage H 600 - Manual (Page 16)

12 ENGLISH
2 Technical Data
Nominal current .......................... 2,1 A
Rated power input ....................... 1,2 kW
Working pressure ........................ 80
– 600 bar
Max. operating pressure ............. 700 bar
Delivery rate ............................... 0,82 l/min
Operating time ............................ 100 % - 80 bar
Class of protection ...................... I
Protection type ............................ IP 54
Typical A-rated sound level:
Noise pressure level (L
pA
) ........... 66 dB (A) ¦ K
pA
3 dB (A)
Sound power level (L
WA
) ............. 77 dB (A) ¦ K
WA
3 dB (A)
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60745-1:2010.
3 Function of the Unit
3.1 Overview (A)
1 Plug / socket foot-operated switch 7 Indicator lamp “Setting up”
2 Plug / socket tool control system 8
Indicator lamp “Fault”
3 Fuses 1.6 A / 0.25 A slow-blowing 9 Rotary knob operating pressure
4 Switch “ON” and “OFF” 10 Housing
5 Switch “Setting up” and “Automatic” 11
Connection hydraulic hose / quick
coupling
6 Indicator lamp “Ready for operation” 12 Safety foot-operated switch
3.2 Device description
The ROTHENBERGER electrohydraulic device, that is to say the H 600 expander system, is a
universal and mobile system for the serial expanding, reducing and calibrating of normal and
thick-walled pipes for trade and industry.
It consists of two main groups:
1. Hydraulic pump and control system (13002 electrohydraulic device H 600)
2. Hydraulic pistol as tool carrier (expander pistol H 1 no. 12001 included in the scope of
supplies of the H 600 expander system no. 13100, or optional expander pistol H 2 no.
12002)
Working which is appropriate for the material involved is ensured as a result of the infinitely vari-
able and precisely adjustable working pressure with setting up and automatic operation.
The following ROTHENBERGER expander heads can be used:
Tool carrier expander pistol H 1 (included in the scope of supplies of the 13100)
Rivet expander heads (standard) Ø 8
– 42 mm and 5/16“ – 1 ¾“ to 1.6 mm wall thickness
Rivet expander heads type S Ø 22
– 67 mm and 7/8“ – 2 ½“ to 2.5 mm wall thickness (only
with the aid of adapter no. 11007)
Tool carrier expander pistol H 2 prod. no. 12002 (available as an accessory)
Rivet expander heads type S Ø 22 – 67 mm bzw. 7/8“ – 2 ½“ bis 2.5 mm wall thickness (only
with the aid of adapter no. 11007)
Rivet expander heads H 2 type 2 Ø 28 – 70 mm and 1 1/8“ – 2 ¾“ to 2.5 mm wall thickness
Rivet expander heads H 2 type 3 Ø 70
– 110 mm and 2 ¾“ – 4 ¼“ to 3.0 mm wall thickness