ROTHENBERGER ROSCOPE 1000 Set TEC 1000 - Manual (Page 21)

ENGLISH 19
9.13 Pan/Zoom and Brightness Mode for live image
Refer back to section 9.4 for screen navigation architecture, the menu screen necessary to change
this feature is shown in Figure 22 below.
Figure 22 – Pan/Zoom [Live Image] Menu Setting
Use the buttons to change the setting. Press the button two times to exit into live
mode. You will notice that in the live image, the icon at the bottom left of the screen will display
the mode that the device is currently set to (see Figure 23).
Î In LED / Zoom Mode the buttons will change LED brightness and the
buttons will control the zoom level.
Î In Pan Mode the buttons allow the user to move the picture around on
the LCD display.
NOTE: You may witness black regions around the perimeter as the live image moves within the
LCD. For maximum benefit of the Pan feature the device should be fully zoomed in.
Figure 23 – LED-Zoom Mode / Pan Mode