ROTHENBERGER ROCAM 3 Multimedia User Manual
Page 34
ENGLISH
32
Press . A new damage catalogue opens.
Use the navigation buttons
to select the relevant damage. Pressing will insert the da-
mage above the date and metre count and store it to the recording.
When the camera head is pushed further, the insertion disappears again, but it is noted in the log
file with the metre count data.
4.1 Introduction of a defect pattern for an active video recording
Start a video recording as described under Point 2. Pressing
takes you directly from Live mode
into the defect catalogue. The already started video recording is paused for the period of the
defect selection.
Use the navigation buttons
to select the respective defect.
Confirmation with causes of the defect to be blended in with details of the date and distance
in metres into the pipe and for these to be saved on the recording. A running video recording will
be continued.