ROTHENBERGER ROWELD P250-630B Plus Premium - Manual (Page 32)

ENGLISH 30
 Use the arrow keys to select the desired pipe and press OK to confirm.
In this final overview of the pipe parameters, the pipe data are shown according to DVS
guidelines. Press OK to show the window for the welding parts and laying system.
Non-standard modifications can be made by pressing the relevant display field and pressing
ENTER to save. In the Standard point, the description then changes. This can be entered into
the comments field later before printing out the log on the computer. After the pipe data
have been confirmed and saved by pressing OK, the main menu appears.
For P500-630/18-24B Plus: For lifting the milling equipment and the heating element, use lifting
device 53410 (P500/18B) or 53323 (P630/24B/P630/24B Plus), or a suitable tool.
3.2.2 Welding preparations
 Pipes smaller than the maximum welding range (diameter) of the machine, mount the
adapter clamping inserts suited for the pipe diameter with the Allen screws found in the
accessories kit.
ROWELD P250-355/8-12B: consisting of six wide-surface shells and two small-surface shells
ROWELD P500-630/18-24B Plus: consisting of six wide-surface shells and two small-surface
shells (for diameters up to 450 mm) or 8 wide-surface shells (for
diameters >500 mm).