elektraLite Variable White Dazer - Manual (Page 6)

9. DMX 512 Setting (address).
Sets up the address for the dmx.
Using the Menu button in the root menu go to DMX
Press Enter to get into DMX menu and the display will read the current dmx channel.
The display will read for example d.001
This means the fixture's current address is 001
To change it, use the ↑ or ↓ buttons to get to the correct address.
Press Enter to save the dmx address. The display will momentarily display the word "OK" and then go
back to the DMX menu.
To exit out to the root directory, use the menu button.
10. Fixture Personality.
There are several different choices on how the Elektralite VW Dazer will operate.
What these "Personalities" do, in terms of their channel assignments, is detailed on the tables page 8
& 9.
To change a Personality use the Menu button to get to PERS
Press Enter and then using the ↑ or ↓ buttons go to the personality required.
Press Enter to save the Personality.
11. ID Address.
A Elektralite VW Dazer can be addressed (controlled) through the dmx or instead it can have its own
unique ID address.
There are a total of 255 different ID addresses from 1 to 255.
To set up the address for a fixture, use the Menu button in the root menu go to ID
Press Enter and then using the ↑ or ↓ buttons,to select the ID address.
Press Enter to save the address.
For the ID address to work you must choose the WS id personality.
This allows you to access the ID address system on channel 6.
Set the DMX address to d.001 for the fixture. So if ID address 123 is chosen then go to channel 6 on
the lighting board and set the level at 123. You will then be controlling only fixture(s) with ID address
123.