elektraLite Pancake QUAD 36-12W Quad LED Moving Yoke User Manual
Page 3
absolutely no exceptions.
If Elektralite LED Pro Line Pancake is operated in any way different to the one described in this manual,
Elektralite LED Pro Line Pancake maybe damaged and the guarantee will be void.
4. Installation
Please refer to the picture below:-
Screw the half cheeseboro or “C” clamp (not provided with the fixture) onto the U bracket supplied with
Elektralite LED Pro Line Pancake.
Insert the quick-lock fasteners of the U bracket into the respective holes on the bottom of Elektralite LED
Pro Line Pancake. Tighten the Camloc fasteners fully clockwise. Please do not use pliers, crest
wrenches and the like to turn the Camlocs. If you do, there is very real likelihood that you will break them.
(These can be replaced at a substantial cost to your boss!)
Pull the safety cable through the bracket on the bottom of the base and over the trussing or any
secondary fixing point. Do not clamp the cable to the U bracket or clamp. That is not a secondary safety
point.
A secondary safety point is any point that will adequately hold Elektralite LED Pro Line Pancake if the U
brackets, cheesboro or the fixtures base breaks or fails. Then the safety cable would be the backup and
stop the fixture from falling to the ground.