Safety instructions, General guidelines – elektraLite LXE 700 Wash User Manual

Page 3

Advertising
background image

-

2 - LXE700 wash

Safety Instructions.

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this user manual. LXE 700 Wash is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to LXE 700 Wash, then it
could void the warranty.
During shipping, LXE 700 Wash may have been exposed to high temperature changes or humidity changes.
So, as a precaution, do not switch LXE 700 Wash on immediately. Condensation can damage LXE 700 Wash
so leave LXE 700 Wash switched off until it has reached room temperature.
The electric connection must be carry out by a qualified person and it is absolutely essential that LXE 700
Wash

be grounded.


Always disconnect LXE 700 Wash from the power source, when the device is not in use or before cleaning it.
Only unplug LXE 700 Wash from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, LXE 700 Wash will heat up when it is turned on and it will be very hot to touch.

Please keep LXE 700 Wash away from children and the general public. Please be intelligent and use common
sense when operating LXE 700 Wash.

General Guidelines.

LXE 700 Wash

is a lighting fixture for professional use on stages, in theatres, arenas, churches and so on.

LXE700 Wash

should only be operated at 120 volts and only indoors.

LXE 700 Wash

should not be operated 24/7 (24 hours a day; 7 days a week). LXE 700 Wash needs operation

breaks to ensure that it will work for a long time without problems. Please do not shake LXE 700 Wash and
avoid using brute force when installing or operating it.

When choosing the location to install LXE 700 Wash, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between LXE 700 Wash and the illuminated surface must be more
than 10 feet.

Always mount LXE 700 Wash with an appropriate safety cable. If you use the quick lock cam to hang LXE 700
Wash

please make sure the 4 quick lock fasteners are locked into position correctly.


Operate LXE 700 Wash only when you are familiar with the features on the fixture. Do not permit operation by
persons not qualified for operating it.
All modifications to LXE 700 Wash will invalidate the warranty. There are absolutely no exceptions.

If LXE 700 Wash is operated in any way different to the one described in this manual, LXE 700 Wash maybe
damaged and the guarantee will be void.

Advertising