9 usb update, 10 network update, 11 factory reset – Ferguson Ariva Link 100 User Manual
Page 25: Settings, 1 network connection, 2 ariva share
15.9 USB update
Download
Download from
the latest system software to
your PC and transfer the file to an USB memory.
USB
Connect the USB memory to your receiver.
NOTE
It is only possible to update via an USB memory formatted in FAT32.
Start
Enter this menu option to start the update.
Reboot
After an update the set will automatically shutdown. Reboot the set after
the shutdown.
15.10 Network update
Update your receiver with the latest system software via the Internet.
Network update
Select Network update to start the network update.
Reboot
After an update the set will automatically shutdown. Reboot the
set after the shutdown.
15.11 Factory reset
Reset all channel data to the receiver factory settings. All stored channels, lists and
settings will be deleted.
NOTE: It is recommended to make a factory reset after you updated your set via
network or USB. Before you make a factory reset, export all data to the USB memory
with the export data function (chapter 18.4) and import them again after the factory
reset. In case the data cannot be imported, setup your set again.
16. SETTINGS
16.1 Network connection
During booting your receiver will connect automatically to the network.
Auto
To connect automatically by DHCP.
Manual
To connect manually with a static IP address.
IP
Enter the fixed IP address.
Subnet mask
Enter the subnet mask address. In general it is 255.255.255.0.
Gateway
Enter the router’s IP address.
DNS Server
Enter the DNS Server’s IP address. In general it is the router’s IP
address. You can enter 2 DNS Server IP addresses.
Press MENU key to connect.
Modem
To connect with your telephone line.
Phone number
Enter the phone number to dial in.
Press MENU key to connect.
16.2 ARIVA share
Stream movies, MP3s, photos (only supported formats) from your PC Shared
Documents Folder to the receiver in your local network.
Enter
ARIVA share
(Settings menu) to connect.
Windows
Select the PC Windows system (XP/Vista/Windows7).
PC IP address
Enter the IP address of your PC. If required enter a
Username/Password.
PC Folder name Select the name of the Shared documents folder.
XP: Shared/SharedDocs.
Vista: Public.
Windows 7: Users.
Press MENU key to connect.
In case a connection cannot be established check your PC settings.
Enter the shared documents folder settings and activate the option: share this folder
in the network.
25