Ferguson Ariva S300 - Manual (Page 18)

transponder (if such information is set in the signal);
-One TP: scans only the selected frequency;
-Blind scan: is an automatic search for available satellite frequencies;
-Fast scan: receiver scans the channels of the selected provider bucket. You can add
channels to an existing list or replace an existing list. Please note that the search result
and working of this function depends solely on the provider.
10.3 List of transponders
Channels on satellites are located in "sets". Such a "set" of channels comprises a transponder.
A list of transponders is a list of frequencies available on a given satellite. In this menu you can
edit, add and remove individual frequencies. Select a satellite by pressing the up/down arrow
keys, and the desired frequency using the up/down arrow keys.
How do I search for a new channel?
In order to search for a new channel, you must know the basic channel parameter, i.e. the
frequency on which it is broadcast. This parameter may be obtained from the broadcaster, on
the internet, in the press, etc.
18