Ferguson FK-1000 - Manual (Page 11)

FIRST STEPS
1. Insert the plugs of the receiver’s and the auxiliary equipments in the power socket and switch
them on.
2. Select the AV channel on the TV set.
3. The receiver is delivered with pre-programmed TV channels and can be used immediately. To
see if there are any new channels, then activate the channel search.
Caution: Check the connections of all equipment and the antenna are in working order
before connecting the receiver to the power source.
MENU INFORMATION
The user interface has various ways to navigate through the menus and functions. Some of the
keys on the remote control unit give direct access to functions. The most important keys are
identified as EPG, colored keys, MENU and OK. Other keys are multi-functional which means
that their function changes dependent of the mode that you are in.
Unless otherwise specified; this note explains the way you can navigate through the pages of
the user menu.
1. Use the up and down keys to move the cursor up or down from one line to another line.
2. Use the left and right keys to move the cursor left or right the sub-menu.
3. Use the OK key to enter the sub-menu.
4. Use the EXIT key to leave the menu and return to the view mode.
5. In a sub-menu: use the OK key to confirm the selection; the Green bar indicates the active
selection
11